Espana Francais English Deutsch Cesky Slovensky

: About us : Products : Price list : Contacts : Home



» HAKL PM » HAKL PM-T » HAKL MK-1 » HAKL MK-2 » HAKL VA » HAKL SR 1000 » Direct water heating is cheaper
HAKL PM Model Series
Electric, hydraulically operated instant water heater supplied with a special low-pressure tap to be installed on a cold-water inlet.

The best selling model series in the market.
Low price, reliability and simple operation classes this model series amongst the most demanded in the market.


Click to choose a model:
HAKL PM with a standard tap
sink shower
under sink combined
 
HAKL PM with a lever tap
sink shower
under sink combined
Main advantages of the HAKL PM Model:
– Installation of the heater consists of the installation of a special tap for the cold water inlet and connection to an electrical supply;
– Operation of the heater is very simple; heating is automatically activated by turning on the hot water tap;
– Price of the heater is very advantageous and in combination with any model of tap, also most affordable;
– Safety of the heating element is ensured by it being built into a ceramic package, which extends its operating life;
– Design of the heater received an award from the Slovak Design Centre in the national competition "National Prize for Design".

Technical parameters Model 3.5 kW Model 4.5 kW Model 5.5 kW
Type specification PM 135 PM 145 PM 155
Voltage protection at 230V/~50 Hz 16 [A] 20 [A] 25 [A]
Level of protection IP 24 IP 24 IP 24
Operating flow 1.2 l/min 1.5 l/min 1.8 l/min
Water heating from 28 °C to 40 °C 1.75 l/min 2.15 l/min 2.70 l/min
Minimum water pressure
(operating) 		0.8 bar 1.1 bar 1.4 bar
Maximum water pressure
(constant) PM type 		0 bar 0 bar 0 bar
Dimensions (h/w/d) 18/14/8 cm 18/14/8 cm 18/14/8 cm
Weight 0.9 kg 0.9 kg 0.9 kg
Recommended tap combination sink, under sink sink, under sink, combined, shower combined, shower

Operation of the heater:
The operation of the heater is very simple; heating is automatically activated by turning on the hot water at the mixer tap. A red light on the front cover of the heater signals the activation of hot water heating. The highest heating of water is reached at the point that the signal light turns on.
The water temperature drops in proportion to an increase in the flow of water. The required water temperature may be set by increasing the hot water flow or by mixing with cold water.
The heater is only supplied with a special low-pressure tap, which prevents exposure of the heater to the water pressure (0.6 Mpa = 6 bar) in water pipes. This heater is intended to be installed directly to a single consumption point, for a cold-water inlet. The heater has no built-in tank and heats water instantly, on demand. The HAKL PM water heater is a non-pressure model; therefore, it cannot be connected to a standard water tap.