HAKL - elektrické prietokové ohrievače vody. Elektrický prietokový ohrievač s ktorým ušetríte Home Home …TO HAVE HOT WATER IN YOUR HOUSE…

HAKL PM-T

HAKL MK-1

HAKL MK-2

HAKL SLIM

HAKL PM

HAKL MK-1 Model Series

Electric, electronically controlled instant water heater supplied with a special low-pressure water tap to be installed on a cold-water inlet.

European No. 1 in its class

Heater that is, in the European market, one step ahead of the competition due to its use and technical parameters.

Click and choose a model:

HAKL MK-1 with a standard tap

sink
under sink

HAKL MK-1 with a lever tap

sink  
under sink   

Main advantages of the HAKL MK-1 Model:

Electronic safety cut-out against the burning of the heating element by the penetration    of an air bubble to the water supply system (e.g., when the water supply is stopped);

Alarm light for a voltage drop on the electrical network; flashing signals a drop in voltage, as well as incorrect functioning of the heater;

Thermal overload protection shuts down the heating element if the temperature of the    inlet water increases, in order to prevent subsequent boiling of the water and damage to the heating element;

Level of protection IP45 ensures safe operation in a wet environment, meaning, according to the STN standard, that the heater may be installed directly in a shower box or in an open area (pergola, summer terrace...);

Minimum water pressure on operation is set from 0.05 Mpa (0.5 bar), also allowing installation of the heater by connecting it to a variable pressure water treatment device.

Operation of the heater:

The operation of the heater is very simple; heating is automatically activated by turning on the hot water tap at the mixer tap. A red light on the front cover of the heater signals the activation of water heating. The highest heating of water is reached at the point that the signal light turns on. The water temperature drops in proportion to an increase in the flow of water. The required water temperature may be set by increasing the hot water flow or mixing with cold water. The heater is supplied with a special low-pressure water tap and this combination is intended for direct installation to a single consumption point, on a cold-water inlet. The HAKL MK-1 water heater is a pressure model; it may therefore also be connected to a standard water supply tap. The heater has no built-in tank and heats water instantly, on demand.

shower
combined

shower
combined

Connection of the heater to a water supply system. Regarding the low power consumption of the heater, the manufacturer does not recommend using more taps at the same time.

Connection of the heater to the existing faucet. Connection set is not a part of the heater.

HAKL MK1 - detached heater

Technical parameters

model 3,5 kW

model 4,5 kW

model 5,5 kW

Type specification

MK 135

MK 145

MK 155

Voltage protection at 230V ~50 Hz

16 [A]

20 [A]

25 [A]

Level of protection

IP 45

IP 45

IP 45

Operating flow

1,3 l/min

1,6 l/min

1,9 l/min

Water heating from 12 °C to 40 °C

1,9 l/min

2,5 l/min

3,1 l/min

Minimum water pressure (operating)

0,4 bar

0,5 bar

0,6 bar

Maximum water pressure (load)

6 bar

6 bar

6 bar

Thermal overload protection

57 °C

57 °C

57 °C

Thermal emergency protection

70 °C

70 °C

70 °C

Anti-air protection

ano

ano

ano

Dimensions (h/w/d) cm

 19,2/20,5/8,2 cm

19,2/20,5/8,2 cm

19,2/20,5/8,2 cm

Weights

1,6 kg

1,6 kg

1,6 kg

Recommended tap combination

sink, under sink

sink, under sink, combined, shower kombi, sprcha

combined, shower

CONTACT

SERVICE

PRICE
LIST

ELECTRIC
HEATING

PRODUCTS

ABOUT US

Electric instantaneous water heaters

Dimensions of the heater

Print version

Copyright © 2014 hakl.sk. Všetky práva vyhradené.